Polaris RZR XP Service Manual page 318

FINAL DRIVE
10. Carefully install the ring gear and roll cage assembly
i
into the gearcase housing.
11. Install a new O-ring on the cover plate assembly.
NOTICE
Be sure the square O-ring is placed flat on the cover
surface. If the O-ring is twisted, fluid leakage may
12. Carefully install the LH output hub assembly
the cover plate. Take care not to damage the new
cover plate seal while installing the output hub.
7.40
occur.
13. Install the output cover assembly
gearcase housing. Install the nine cover plate screws
s
and torque to specification.
o
into
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
TORQUE
Cover Plate Screws:
11 ft-lbs (15 Nm)
© Copyright Polaris Industries Inc.
a
onto the