Table of Contents
Advertisement
Loader-Control-Reference Bar
The loader-control-reference bar helps stabilize your
hand while operating the loader arm/attachment-tilt
lever
(Figure
4).
Auxiliary-Hydraulics Controls
1. Operate auxiliary
hydraulics in the forward
direction.
InfoCenter Display
The InfoCenter LCD display shows information about
your machine, such as the operating status and
various diagnostics. There is a splash screen and
main information screen of the InfoCenter. To switch
between the splash screen and main information
screen at any time, press any InfoCenter button and
then press the right button.
Figure 12
1. Indicator light
2. Right button—open a
menu where a right
arrow indicates additional
content
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
Figure 11
2. Operate auxiliary
hydraulics in the reverse
direction.
3. Middle button—scroll
down menus
4. Left button—access
menus and exit any menu
The splash screen displays for a few seconds after
you turn the key to the O
screen displays.
g386338
1. Splash screen
2. Run screen
3. Hours operated
4. Battery voltage
5. Attachment mode (Bucket
Mode shown)
InfoCenter Icon Descriptions
g264015
13
position and then the run
N
Figure 13
6. Sleep mode is active.
7. Parking brake is engaged.
8. Battery charge
9. Instantaneous machine
amperage
Menu access
Next
Previous
Scroll down
Enter
Change the current selection.
Increase
Decrease
Exit menu
g390675
Advertisement
Table of Contents
