Related Manuals for Toro Flex-Force Power System 51810T
Summary of Contents for Toro Flex-Force Power System 51810T
- Page 1 Form No. 3450-392 Rev A Flex-Force Power System ™ MAX Power Head Model No. 51810T—Serial No. 321000001 and Up *3450-392* Register at www.Toro.com. Original Instructions (EN)
- Page 2 It is designed (Figure 2), which signals a hazard that may cause to be used only in combination with Toro Flex-Force serious injury or death if you do not follow the Power System 60V Max attachments. It is designed to recommended precautions.
-
Page 3: Important Safety Instructions
II. Preparation Keep bystanders and children away from the operating area. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 120 V can cause a fire or electric shock. - Page 4 68°C (154°F) or incinerate Refer to your attachment Operator’s Manual for it. Replace the battery pack with a genuine Toro additional PPE specific to your attachment. battery pack only; using another type of battery pack may cause a fire or explosion.
- Page 5 Do not attempt to service or repair the appliance, battery pack, or battery charger except as indicated in the instructions. Have an Authorized Service Dealer perform service using identical replacement parts to ensure that the product is safely maintained. Store an idle appliance indoors in a place that is dry, secure, and out of the reach of children.
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal145-3141 145-3141... -
Page 7: Installing The Auxiliary Handle
Setup Installing the Auxiliary Handle Parts needed for this procedure: Auxiliary handle assembly Procedure Separate the auxiliary handle from the handle plate by removing the 4 socket head screws using the provided Allen wrench (A of Figure Line up the auxiliary handle with auxiliary handle plate on the trimmer handle (B of Figure Secure the auxiliary handle to the handle plate with the 4 socket head screws previously removed (C of Figure... -
Page 8: Product Overview
Product Overview Operation Starting the Attachment WARNING Do not attempt to operate the power head without an attachment installed. Read and follow the Operator’s Manual for your specific attachment before operating the power head. Ensure that the vents on the attachment, power head, and battery are clear of any dust and debris. - Page 9 Removing the Attachment from the Power Head To remove the attachment from the power head, refer to the Operator’s Manual for your attachment. g357456 Figure 6 1. Lockout button 3. Run trigger 2. Variable-speed switch Shutting Off the Attachment To shut off the attachment, release the run trigger. Whenever you are not using the attachment or are transporting the trimmer to or from the work area, remove the battery pack.
-
Page 10: Maintenance
Call2Recycle seal, please contact your local municipality for more information on how to responsibly recycle the battery. If you are located outside of the US and Canada, please contact your authorized Toro distributor. -
Page 11: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The tool does not start. - Page 12 California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.