Toro e-Dingo 500 Operator's Manual page 12

Traction Control
Use the traction control to move the machine. The
farther you move the traction control in any direction,
the faster the machine moves in that direction.
Release the traction control to stop the machine.
1. Reference bar
2. Traction control
•
To move forward, move the traction control
forward.
•
To move rearward, move the traction control
rearward.
Important:
When reversing, look behind you
for obstructions and keep your hands on the
reference bar.
Figure 5
Figure 6
Figure 7
•
To turn right, rotate the traction control clockwise.
•
To turn left, rotate the traction control
g264835
counterclockwise.
g264830
•
To stop the machine, release the traction control.
Loader Arm/Attachment-Tilt Lever
Slowly move the lever to operate the loader arms and
tilt the attachment.
g264831
1. Lower the loader arms.
2. Raise the loader arms.
By moving the lever to an intermediate position (e.g.,
forward and left), you can move the loader arms and
tilt the attachment at the same time.
12
Figure 8
Figure 9
Figure 10
3. Tilt the attachment
rearward.
4. Tilt the attachment
forward.
g264833
g264832
g386336