12. Carefully install the LH output hub assembly
the cover plate. Take care not to damage the new
cover plate seal while installing the output hub.
13. Install the output cover assembly
gearcase housing. Install the seven cover plate
s
screws
and torque to specification.
TORQUE
Cover Plate Screws:
9 ft-lbs (12 Nm)
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
o
FRONT GEARCASE INSTALLATION
into
1. Install the gearcase back into the vehicle through the
LH wheel well area, above the upper A-arm.
a
onto the
2. Lubricate the front gearcase splines with Anti-Seize.
3. Install the prop shaft onto the front gearcase input
shaft. Use a NEW spring pin in the front prop shaft.
4. Install the four bolts
to the frame and torque to specification.
5. Install the vent line
2015-2016 RZR 900
FINAL DRIVE
q
that secure the front gearcase
TORQUE
Front Gearcase Mounting Bolts:
33 ft-lbs (45 Nm)
w
.
2016 RZR S 1000 Service
7
7.31