Ignition (Key) Switch; Awd / 2Wd Switch (No Turf Mode) - Polaris RZR 900 2015 Service Manual

Table of Contents

IGNITION (KEY) SWITCH

1. Disconnect the key switch harness by depressing the

connector lock and pulling on the connector. Do not

pull on the wiring.

2. Test between the 3 sets of outputs (OFF / ON /

START). If any of the tests fail, replace ignition

switch assembly.

• Turn the ignition key to ON. There should be continuity

between switch pins C and D.

• Turn the ignition key to START. There should be

continuity between switch pins A and B; C and D.

9926814 R08 -

1. Disconnect the AWD / 2WD switch harness by

depressing the connector locks and pulling on the

connector. Do not pull on the wiring.

2. Test between the 2 sets of outputs (AWD / 2WD). If

any of the tests fail, replace the switch assembly.

• Move the switch to AWD (ON). There should be

continuity between switch pins 2 and 3 as well as 3

• Move the switch to 2WD (NONE / OFF). There should

ONLY be continuity between pins 3 and 7.

2015-2016 RZR 900

2016 RZR S 1000 Service

Table of Contents