Shift Lever / Cable; Shift Lever Removal; Shift Lever Installation; Shift Cable Inspection - Polaris RZR 900 2015 Service Manual

TRANSMISSION

SHIFT LEVER / CABLE

SHIFT LEVER REMOVAL

1. Remove the shift knob cover
e
and shift knob from the shift lever
Remove the screws retaining the center console
using a T27 and T30 Torx driver. Remove the console
from the vehicle.
2. Remove the clip and washer retaining the shift cable
to the shift lever and disconnect the cable end from
the lever.
3. Remove the retaining ring
y
off the mounting bracket and out from the frame.
4. Remove both bushings
service as needed.
9926814 R08 -
6.4
q
, retaining screw
r
.
t
and slide the shift lever
u
from the shift lever and
2015-2016 RZR 900

SHIFT LEVER INSTALLATION

Perform the removal steps in reverse order to install the
w
gear shift lever (lever, cable, console, shift knob).

SHIFT CABLE INSPECTION

Shift cable adjustment may be necessary if symptoms
include:
• No gear position or AWD display on instrument cluster
• Ratcheting noise on deceleration
• Inability to engage into a gear
• Excessive gear lash (noise)
• Gear selector moving out of desired range
Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.