Huawei NetCol8000-C070 Quick Manual page 27

7
Commissioning
 If optional components such as heating and humidification devices are not configured, the
system does not display the commissioning, and you can skip the commissioning procedures.

To prevent the effect of misoperation on the system, log in as the operator user first before
modifying parameters. Confirm with Huawei before modifying parameters which cannot be
modified by the operator user; otherwise, Huawei will not be liable for any consequences of
the modification.
 The following figure shows the flowchart for the first power-on. If the system has been powered
on previously, choose Maint > Wizard Startup to perform the commissioning.
 The indoor fan is a mandatory commissioning item. Other components can be commissioned
depending on actual requirements.

The Service Expert app can be downloaded from Huawei App Store. The app is supported by
only Android at present.
 The Service Expert app supports both online boot and offline boot. The offline boot is taken as
an example in the following part. For details about online boot, refer to the section Start in
NetCol8000-C(070-260) In-room Chilled Water Smart Cooling Product User Manual.

Open the Service Expert app, choose Startup Commissioning > Offline Boot, and enter the
bar code on the system LCD and the verification code. The app automatically generates a
startup password.
8
Checking after Commissioning
Check Item
The controller has exited from the diagnostic mode.
The temperature and humidity are correctly set.
9
Power-Off
1. Tap Shutdown on the LCD home screen.
2. Turn off all switches on the smart cooling product.
3. If the smart cooling product will not be used over a long time, drain the water in the heat
exchanger or take antifreeze measures to avoid frost cracks.
27
Result
□Passed □Failed
□Passed □Failed