Huawei NetCol8000-C070 Quick Manual page 22

CAN teamwork networking
Upflow
FE monitoring
CAN Teamwork Networking and Northbound RS485 Monitoring
Set the northbound RS485 grouping switches, namely, toggle switches 2 and 3 on the main
control module, for the smart cooling product addressed 4 x N to OFF, except the smart cooling
product in the end. Retain the default settings of other toggle switches.
Set the DIP switches on the main control module as follows.
Toggle Default
Switch Value
1 OFF
2 ON
3 ON
4 OFF
The figures below use
side cable routing as
an example. Top cable
routing is also
supported.
Site Operations
N/A
Northbound RS485 branch switch to control the monitoring of northbound devices by
group. If you need to enable the monitoring of northbound devices by group, flip toggle
switches 2 and 3 on the main control module for the smart cooling product addressed 4
x N to OFF.
The switch toggle is used to restore default factory settings.
Downflow
22