Polaris RZR PRO R Service Manual page 80

MAINTENANCE
Vehicles subjected to severe use must be serviced at
50% of the stated interval. Examples of Severe Use:
Frequent immersion in mud, water, or sand, constant
high RPM use, prolonged low-speed heavy load
operation, extended idle, and short trip cold weather
operation.
INITIAL BREAK-IN SERVICE
FIRST 25 HOURS / 1 MONTH
Inspect air filter; replace as
necessary. Ensure proper
Engine Air Filter installation of filter and airbox
cover. Inspect ducts and
screens; clean as necessary.
Fluid level inspection; inspect for
fluid leaks; add coolant if needed.
Cooling System Inspect coolant strength
seasonally; pressure test system
yearly.
Locate all applicable fittings and
General
grease.
Lubrication
Shift Cable /
Inspect; adjust as needed.
Linkage
Parking Brake (if
Inspect; adjust as needed.
applicable)*
Check terminals; terminals
should be tight and free of
Battery
corrosion. Clean, test, and
replace as necessary.
Engine Oil and
Change the engine oil and filter.
Filter
Front Gearcase Initial fluid level inspection; add
Fluid lubricant if needed.
Rear Gearcase Initial fluid level inspection; add
Fluid lubricant if needed.
Initial fluid level inspection;
Transmission Fluid
inspect for fluid leaks; add
lubricant if needed.
Spark Arrestor Inspect; clean as needed.
The break-in period consists of the first 25 hours of
operation. Careful treatment of a new engine and drive
components will result in more efficient performance
and longer life for these components. The items
outlined in this service interval only need to be
performed at the first 25 hours of operation. They do
not need to be performed every 25 hours.
* It is recommended to have an authorized Polaris
dealer perform these services.
2.6
Vehicles subjected to severe use must be serviced at
50% of the stated interval. Examples of Severe Use:
Frequent immersion in mud, water, or sand, constant
high RPM use, prolonged low-speed heavy load
operation, extended idle, and short trip cold weather
operation.
EVERY 25 HOURS / 500 MILES (800 KM) OR
YEARLY FOLLOWING INITIAL BREAK-IN SERVICE
Inspect air filter; replace as
necessary. Ensure proper
Engine Air Filter installation of filter and airbox
cover. Inspect ducts and
screens; clean as necessary.
Check terminals; terminals
should be tight and free of
Battery
corrosion. Clean, test, and
replace as necessary.
Fluid level inspection; inspect for
fluid leaks; add lubricant if
Brake System
needed. Inspect brake pad wear.
Inspect hoses for damage.
Locate all applicable fittings and
General
grease.
Lubrication
Inspect; Clean external surfaces.
Radiator
Inspect; Adjust pressure level as
needed; Inspect wear and
Tires
replace as needed.
Shift Cable/
Inspect; adjust as needed.
Linkage
* Have an authorized Polaris dealer or other qualified
person perform these services.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.