Information Display Area - Polaris RZR PRO R Service Manual

ELECTRICAL
q
Vehicle Speed Display - Analog display of vehicle speed in MPH or km/h.
w
Information Display Area - Odometer / Trip Meter / Tachometer / Engine Temperature / Engine Hours /
Service Info / Clock - LCD display of the service hour interval, total vehicle miles or km., total engine hours, a trip
meter, engine RPM and engine temperature.
e
MPH / KM/H Display - MPH is displayed when the instrument cluster is in the Standard mode. KM/H is displayed
when the instrument cluster is in the Metric mode.
r
High Beam Indicator - LED icon illuminates whenever the headlight switch is in the high beam position.
t
Fuel Level Indicator - LCD bar graph indicating current fuel level.
y
Clock - Displays current time in either 12-hour or 24-hour formats.
u
Engine Temperature Indicator - Illuminates when the ECU determines the engine is overheating. The indicators
will initially flash to indicate the engine is overheating. The indicators will stay lit and not flash if a severe overheating
condition exists.
i
Service Interval Indicator - Preset at the factory and adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached and maintenance should be performed. The wrench icon
will flash for 10 seconds upon start-up once it reaches 0.
o
Check Engine MIL - Illuminates when the ECU has detected a Diagnostic Trouble Code in the engine
management system.
a
AWD Indicator - Illuminates 2WD, 4WD, and 4WD Lock modes when a forward/reverse gear is selected.
s
Neutral Gear Indicator - Illuminates when gear selector is in the neutral (N) position.
d
Gear Position Indicator - Displays gear selector position.
H = High
L = Low
N = Neutral
R = Reverse
P = Park
– = Gear Signal Error (shifter stuck between gears)
f
Power Steering System MIL - Illuminates when a fault has occurred with the power steering system. This
indicator illuminates when the key is turned to the ON position and goes off when the engine is started.
g
Turn Signal / Hazard Lamp Indicator - Illuminates whenever the LH, RH or hazard lamps are activated (INT'L
Models Only).
h
Helmet / Seat Belt Indicator - Illuminates for several seconds when the key is turned to the ON position. The
lamp is a reminder to the operator to ensure all riders are wearing helmets and seat belts before operating the
vehicle.
k
Performance Limited Indicator - Illuminates when engine performance is electronically limited.
l
Low Fuel Indicator - Illuminates when fuel level reaches lowest bar on fuel level indicator.
1(
Engine Speed Display - Analog display of engine speed in thousands of revolutions per minute.
2)
Parking Brake Indicator - Illuminates when parking brake is engaged (INT'L Models Only).
2!
Low Battery Indicator - Illuminates when battery voltage is low, charging system may be overloaded.

INFORMATION DISPLAY AREA

The LCD portion of the instrument cluster is the information display area. Information displayed in this area includes:
odometer, trip meter, engine RPM, engine hours, service interval, clock, engine Diagnostic Trouble Codes (DTCs) and
power steering DTCs.
12.8
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.