GE AKTA pilot 600 User Manual page 86

4 Operation
4.5 Pressure control
Step
2
3
4
Activate pressure control in a
method
To activate pressure control in a method, select Control the flow to avoid overpressure
in the Phase properties of Method Settings.
The pressure control applies by default to the pre-column pressure.
86
Action
Open Pressure control parameters in the Advanced section of the System
Settings dialog.
Set the parameters as required. Click
online help for the pressure control parameters.
Click OK.
or press F1 to access the UNICORN
ÄKTA pilot 600 User Manual 29274559 AA