4 Operation
4.4 Dual pump flow
Using the Process Picture
Follow the steps below to start dual pump flow using the Process Picture.
Step
1
2
Using dual pump flow manually
Follow the steps below to start dual pump flow using manual instructions.
Step
1
2
82
Action
Click on one of the pumps to open the System pumps dialog box.
Tick the Dual pump flow check box, enter System flow value and click Set.
Action
Select System Control:Manual:Execute manual instructions to open the
Manual instructions dialog box.
Select Pumps:Dual pump flow, enter your parameters and click Execute.
ÄKTA pilot 600 User Manual 29274559 AA