Call Forward Setting - ABB H8131 P Series Product Manual

8.1.15

Call forward setting

This setting is available when the device type of outdoor station is set to "OS" or "GS". If this
function is enabled, each incoming call from this outdoor station will be transferred to the
designated guard unit.
Please follow the steps below:
[1] On the "Outdoor station settings" screen, select the check box "Call forward" to enable the
function.
[2] Enter the address of the designated guard unit (1...32).
[3] Tap " " to exit the setting, tap "OK" to save the settings.
Product manual 2TMD041900D0015
Commissioning
│37