Door Status Detection Setting - ABB H8131 P Series Product Manual

8.1.7

Door status detection setting

If this function is enabled, the IP touch will send an alarm to the management software when the
door is open longer than 120 s (a sensor should first be connected to the outdoor station).
Please follow the steps below:
[1] On the "Outdoor station settings" screen, select the check box "Door status detection" to
enable the function.
[2] If the function "Sound of local alarm" is enabled, the IP touch also sounds an alarm locally.
[3] Tap " " to exit the setting, tap "OK" to save the settings.
Product manual 2TMD041900D0015
Commissioning
│29