Subsidiary Lock Setting - ABB H8131 P Series Product Manual

8.1.6

Subsidiary lock setting

Please follow the steps below:
[1] On the "Outdoor station settings" screen, select lock type from the drop-down list. It can be
set to "Lock-GND", "NO-NC-COM" or "IP Actuator".
[2] If lock type = "IP actuator", you need to set the lock type from the drop-down list. It can be
set to "Power lock" or "Relay lock" (optional).
[3] If lock type = "IP actuator", you need to set the device number of the IP actuator (optional).
[4] Enter the unlock time for the power lock (default 5 seconds).
[5] Enter the unlock time for the signal lock (default 5 seconds).
[6] Tap " " to exit the setting, tap "OK" to save the settings.
Product manual 2TMD041900D0015
Commissioning
│28