Table of Contents
Advertisement
MANUAL OPERATION FOR THE LEG
Adjust the angle and length of the legrest before starting a massage. (See Page 8)
1
Press the OFF/ON button.
•
The OFF/ON indicator will come on.
1
2
Press the Leg Massage button.
•
The air massage will begin.
•
Leg massage intensity is displayed by the indicator.
2
3
As you like
A Adjusting the massage intensity
•
The intensity is adjustable in steps.
•
The intensity will move 1 step each time the button is
pushed, moving in order of medium, strong, off and
weak.
•
Default is level .
* If only the Leg Massage is used, OFF is omitted.
B Press the Leg Stretch button.
•
Press again to stop the leg stretch.
4
Auto shut-off in leg massage/stretch
•
The massage will end after approximately 15 minutes and the unit will
automatically shut off.
•
The legrest will automatically lower.
•
If you want to continue using the unit press the OFF/ON button.
Description of Leg Massage/Stretch
Leg massage
A bottom-to-top squeezing action slowly relaxes and softens to comfortably alleviate tired, swollen legs.
Leg stretch
Lowered to
Lowered to
approx. 15˚
approx. 20˚
After the legs have been grasped by
The legrest then rises to a 0° angle,
the airbags, they are slowly stretched
after which it lowers once again to a
as the legrest lowers to a 15° angle
0° angle for a deep stretch.
from the massage position.
Stopping mid-way through a massage
•
Press the OFF/ON button.
Press
•
It will take some time before the air is
completely evacuated. (The sound of
air escaping may be audible after
pressing the OFF/ON button.)
1
13-14
1
2
3
off*
weak medium strong
Raised to
approx. 30˚
The legrest rises again and returns to
a 0° angle.
Immediately stopping the massage
•
Press the Quick Stop button.
Press
•
All movement will stop immediately.
AFTER COMPLETING THE MASSAGE
RETURN THE SEAT TO THE ORIGINAL POSITION
1
Check that there is nothing in the vicinity of
the backrest or the legrest.
2
Press the OFF/ON button twice.
•
The backrest and legrest will automatically return to their original
positions.
The backrest and the legrest can be returned with the reclining button.
(See Page 8)
3
Place the controller in its holder.
4
Return the pillow and the back cushion to
their original positions.
DISCONNECT THE POWER
See Warning No. 1 and 6 on page 1, and No. 1 on page .
1
Slide the power switch to the "off" position.
2
Turn the lock switch key to the "lock" position.
3
Unplug the power cord.
4
The lock switch key must be stored out of the reach of children.
CLEANING AND MAINTENANCE
See Danger No. on page 1.
LEATHER COVERING ON THE PILLOW, THE BACK CUSHION AND THE UNIT
•
Wipe these areas with a soft, dry cloth.
(Do NOT use cloths containing any kind of chemical, etc.)
•
If the synthetic leather is particularly dirty, soak a soft cloth in water or a –5 % solution of mild detergent, wring it out
thoroughly and tap the surface with it. Next, rinse the cloth in water, wring it out thoroughly and then wipe any remaining
detergent from the surface, wipe the surfaces with a soft dry cloth and allow them to dry naturally.
(Do NOT use a hair dryer to try to dry the surfaces more quickly.)
•
Wearing of denim, colored, patterned or other clothing with a tendency to fade should be avoided during use, as it could lead to
discoloration of the synthetic leather.
•
Do not allow these areas to come in contact with plastic for extended periods of time as this may lead to discoloration.
•
Please do NOT use thinners, benzine or alcohol.
PIPE AND PLASTIC AREAS
1 Wipe the unit with a cloth that has been soaked in a mild detergent and then thoroughly wrung out.
Next wipe the unit with a cloth that has been moistened with just water and thoroughly wrung out.
*Make sure you thoroughly wring out the cloth first when cleaning the controller.
Allow the unit to dry naturally.
•
Please do NOT use thinners, benzine or alcohol.
COATED FABRIC
1 Wipe the seat fabric with a cloth that has been soaked in a mild detergent solution and then thoroughly wrung out.
Use a brush to apply a mild detergent to areas where the coated fabric has become particularly soiled. Be careful not to brush
the fabric too much as this may damage it.
Next wipe the fabric with a cloth that has been moistened with just water and then thoroughly wrung out.
Allow the fabric to dry naturally.
•
Please do NOT use thinners, benzine or alcohol.
1
2010/07/09
11:16:40
Advertisement
Table of Contents
