Call Pickup - Toshiba STRATA DK24 Manual

FEATURE USE
CALL FORWARD-FIXED (continued)
CALL HOLDING (continued)
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
FEATURE USE
l
Press a
%
0 button with common appearance.
l
Press the button and dial I+ N (N = the holding
station's intercom number).
l
Press the m button and dial 1 0 + N (N = the
holding CO line's number-0 1 m 36).
CALL HOLDING
EXCLUSIVE HOLD
TO HOLD A CALL (CO line or m button appears on your
station)
While connected to a CO line or intercom call, press them
button.
l
CO or intercom LED flashes green at the On-hold rate.
l
To reconnect the call, press them arm button on hold.
NOTE:
Regarding handsfree answerback, an intercom call must
be answered by pressing the m button or lifting the
handset before it can be placed on hold.
TO HOLD/PARK A CALL AND PLACE ANOTHER CALL (CO
line does not armear on vour station)
1)
2)
3)
4)
While connected to a-CO or intercom call press them
m button and dial 10.
To make another call, press themor am button and dial
the desired number.
Hang up or press the m button when the call is
completed.
To retrieve the held call made in step 1, press them button
and dial D 1 (see Note 3).
NOTES:
1. The on-hold recall tone will be heard within a predeter-
mined time.
2. The heldcallmay be releasedautomatically if the other
party, hangs up (if the CO provides a hold-release
signal).
3. When a CO line is placed on hold, it may be picked up
from any station:
TO USE EXCLUSIVE HOLD (CO line must appear on your
station)
While connected to an outside call, press them button twice.
l
CO LED flashes green at a fast 10 IPS) rate.
l
To reconnect the call, press the h 0 button that is on hold.
NOTE:
When a CO line is placed on Exclusive Hold, it may be
picked up at another station by dialing 1 and the station
number that placed the call on Exclusive Hold; however it
cannot be picked up by pressing a common
q
button at
another station.
CALL PICKUP
TO PICK UP RINGING CO LINE (Tenant l/Tenant 2 Line
Groups)
Press them or m button (or press the m button and
dial 1 I).
TO DIRECT PICK UP ONE OF THE FOLLOWING
1) Station: Press the m button + station number (inter-
com, ringing or held CO line).
2) Intercom Page: Press the m button + 11.
3) External Page: Press the m button + IB.
4) CO line on hold: Press them button + 0 Cl Q (Cl Cl = CO
line number: 01 * 36).
5) Any ringing CO line: Press them button + 1.
32 33