Advertisement
2. Remove or install the remote control batteries.
To charge the remote control batteries with
the battery charger
Charging time for an empty remote control battery is
approximately 3 hours with the battery charger. When
you charge the remote control batteries, the temperature
must be between 10°C/50°F and 45°C/113°F.
1. Remove the empty remote control battery from the
remote control. Refer to
remote control batteries in the remote control on
page 88 .
1401 - 002 - 15.10.2021
To remove and install the
2. Connect the battery charger to a power outlet. The
power indicator (A) for the battery becomes red.
Indicator for the battery status on page 89 .
Refer to
3. Connect the remote control battery to the battery
charger. Make sure that the arrows (B) on the
remote control battery and the battery charger align.
The indicator (C) for the battery status on the battery
charger flashes green when the remote control
battery charges.
4. When the remote control battery is fully charged, the
indicator becomes green. Remove the remote
control battery from the battery charger.
5. Disconnect the battery charger from the mains
outlet.
Indicator for the battery status
The indicator for the battery status is 2 LEDs on the
battery charger: Battery Power LED (red) and Battery
Status LED (green).
Power
Status
Indication
LED
LED
Red
OFF
The charger is ON. No battery in the
light
charger.
Red
Green
The charger is ON. The battery is
light
light
fully charged.
Red
Green
The charger is ON. The battery
light
light
charges.
flash
Red
OFF
Error on the battery charger, or tem-
light
perature out of the charging span.
flash
B
A
C
89
Advertisement
