Advertisement
5. Remove the air filter to release the pressure in the
hydraulic oil tank.
6. Clean the hydraulic oil filter cover (A) and the
adjacent parts.
A
B
C
E
D
7. Remove the hydraulic oil filter cover together with
the sealing ring (B) and the spring (C).
8. Examine the sealing ring for damage. Replace the
sealing ring if it is necessary.
9. Remove the filter holder (D).
74
10. Remove the hydraulic oil filter (E) from the filter
holder.
11. Examine the filter holder for unwanted materials or
particles. Unwanted materials or particles shows
damage or contamination of the hydraulic system.
12. Clean the filter holder with a degreaser and flush the
filter holder with warm water. Dry the filter holder
with compressed air.
13. Install a new hydraulic oil filter in the filter holder.
14. Install the filter holder in the hydraulic oil tank.
15. Install the hydraulic oil filter cover.
16. Install the air filter.
17. Install the front cover and tighten the 4 screws.
To replace the hydraulic oil filter (DXR
275, DXR 305, DXR 315)
WARNING:
hydraulic oil becomes hot during operation
of the product. Let the product become cool
before you replace the hydraulic oil filter.
1. Park the product on level ground.
2. Stop the product. Refer to
275, DXR 305, DXR 315) on page 62 .
3. Open the left hatch on the product.
4. Clean the area around the air filter.
Risk of burn injury. The
To stop the product (DXR
1401 - 002 - 15.10.2021
Advertisement
