Sequence Set Up - JVC SW-D8000U Instruction Manual

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
The time can be in one of two formats, and date can be in one of three formats.
be either a 12-hour or 24 hour clock.
YY/MM/DD.
Changing Time/Date Display Colors:
The color of the on-screen time and date on Monitor-A can be changed to black, gray, or white. To
change time and date color on Monitor-A, select a full-screen view of that camera on Monitor-A ,
and toggle its position and color as described in Section 4.8. This time/date color setting is a global
system setting and therefore all time/date displays will be affected.
Summer/ Winter Time Change:
In some installations personnel with access to the menus are not available to reset the
unit's clock during time changes for summer and winter. The SW-D8000U provides a
simple shortcut to set time forward by an hour in spring and back by an hour in the fall, by
using the FUNCTION key.
To adjust the clock by an hour for Summer/Winter time changes press
FUNCTION (F) and then press the SEQUENCE key.
In April, this will cause the time to be adjusted forward by one hour.
In October, this will cause the time to be adjusted back by one hour.
This function can only be used once in each period. For example, if
FUNCTION + SEQUENCE is pressed during March it will add an hour to the
time, but if FUNCTION + SEQUENCE is pressed again then it will be ignored
until September.
NOTE: When setting the date, select the correct day of the week, 1 to 7. For example, if
today's date is set on a Wednesday and Sunday is day 1 in the week, then enter a '4'
during date setup. This is used to start a SCHEDULED MACRO (Timed Macro) on the
correct day.
4.6

SEQUENCE SET UP

This option lets you specify the sequence dwell time (as displayed when SEQUENCE key is
pressed). The multi-screen dwell time (for the sequencing cameras in multi-screen mode) the Live
and Play modes full screen dwell times are also set here.
displayed.
The full-screen dwell times are the same for both Monitor-A and Monitor-B in Live and Play modes.
Dwell time settings determine the time between each camera sequence in the sequence list.
JVC PROFESSIONAL, IMAGING PRODUCTS
Set Date Format
Set Time
Set Date
Exit
Date format can be either DD/MM/YY, MM/DD/YY, or
Multi-screen Dwell
Live Full Dwell
Play Full Dwell
Exit
Time format can
The following pull down menu is
43