JVC SW-D8000U Instruction Manual page 67

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
Individual Disable:
Provides a listing of each camera that can be disabled or enabled individually.
Power Up Disable:
if activated, causes the multiplexer to automatically disable cameras whose sync or video level are
not present on the video inputs.
Auto Disable Now:
Will automatically disable cameras whose sync or video levels are not present on the video inputs.
COVERT CAMERA
This menu item allows for cameras to be removed from the LIVE display view without affecting the
recording of the camera for review at a later time. In this way, operators or subjects will not be
aware of cameras being recorded.
CAMERA SCOPE
This menu item provides a camera scope representing the incoming analog camera video signal.
To optimize the motion detection abilities and the associated signal the system installer should take
more care in system camera set-up.
The camera scope displays the characteristics of the incoming camera video signal useful to a
system installer in determining if certain aspects of the system installation have been done correctly.
The installer can quickly and easily determine firstly if cameras or their lenses have been set up
incorrectly or secondly if a camera input level and dynamic range is suitable for the motion detection
circuits in a multiplexer.
In Figure 1 (below), the camera has a wide range of luminance, or Grey scales and shows a signal
with a high level of detail. This signal will be suitable for video motion detection applications
because high detail is present.
JVC PROFESSIONAL, IMAGING PRODUCTS
Auto Disable Now
Exit
Covert Camera
Camera 01 :NO
Camera 02 :NO
Camera 03 :NO
Camera 04 :NO
:
:
Camera 16 :NO
[CANCEL] [OK]
67