Table of Contents
Advertisement
SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
4.6
SEQUENCE SET UP
This option lets you specify the sequence dwell time (as displayed when SEQUENCE key is
pressed). The multi-screen dwell time (for the sequencing cameras in multi-screen mode) the Live
and Play modes full screen dwell times are also set here. The following pull down menu is displayed.
The full-screen dwell times are the same for both Monitor-A and Monitor-B in Live and Play modes.
Dwell time settings determine the time between each camera sequence in the sequence list.
NOTE: The camera sequence list for Monitor-A and Monitor-B is programmed using the AutoList™
feature.
To start full screen sequencing on Monitor-A or B:
Select any full screen display by pressing the camera number, and then press
the SEQUENCE key.
To stop full screen sequencing on Monitor-A or B:
Press SEQUENCE again, or press any camera key, or press the
MULTISCREEN key.
4.7
AUTOLIST™
The operator can easily change the DEFAULT of all camera sequencing by using the AutoList™
function. AutoList™ sequence lists exist for Monitor-A, full-screen and Monitor-B. An AutoList™ also
exists for the PLAY mode. DEFAULT settings for the lists are all cameras included, dwell time taken
from menu. The DEFAULT dwell time is 3 seconds.
An AutoList™ recording is started in full-screen mode (LIVE or PLAY) by
pressing ALARM and SEQUENCE keys simultaneously.
Then select cameras in order of the sequence desired and at time desired for individual dwell times.
Press the SEQUENCE key to stop recording of the AutoList™. Dwell times of up (time between key
presses) to 30 seconds are allowed. A maximum of 32 cameras may be put into an AutoList™.
Pressing any key other than a valid camera key or the SEQUENCE key during recording will void the
AutoList™. To return to the DEFAULT of all cameras included in the sequence list, with a fixed menu
programmed dwell time, go to the SEQUENCING menu and change the dwell time.
4.8
RECORD SET UP
This RECORD LIST option is used to specify the order in which images are to be recorded from the
different camera inputs. You can have up to 30 camera numbers in any order. This allows the same
camera number to be repeated in the list as required to increase the update rate or camera priority
on the VCR. In this menu, you can specify the normal record speed for the VCR (time lapse speed)
and the alarm record speed (typically 2 hour mode).
46
JVC PROFESSIONAL, IMAGING PRODUCTS
Multi-screen Dwell
Live Full Dwell
Play Full Dwell
Exit
Advertisement
Table of Contents
