Table of Contents
Advertisement
SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
keystroke function.
The FUNCTION button plus the macro number (1-16) will start the macro.
Pressing the FUNCTION button again can stop a macro.
Up to sixteen (16) macros, each having 32 keystrokes, can be programmed into the SW-D8000U,
depending on the number of cameras on the model.
automatically at up to 20 preset times during the week by using the built-in macro scheduler. (See
MACRO TIMED START). To program MACROS select the MACROS menu item and this pull-down
sub-menu appears:
MACRO RECORD
To initiate recording, select MACRO RECORD in the MACRO sub-menu, and select one of the
macros (1-32) on which to start recording.
menus and go to a default screen. Subsequent keystrokes will be recorded into that macro.
NOTE:
An on-screen indicator, 'F' plus the macro number', will appear and will stay on the
screen until recording of that macro is complete.
Each keystroke will be recorded, until either the FUNCTION key and ENTER is
pressed to terminate recording, or until 32 keystrokes have been recorded.
Special keys functions during MACRO RECORD:
The following two-key combinations provide the programmer with special actions within macros.
FUNCTION then 1
FUNCTION then 2
FUNCTION then 3
FUNCTION then 4
FUNCTION then 5
FUNCTION then 6
FUNCTION then ENTER
Recording new Menu Setups during MACRO RECORD:
If the programmer presses the MENU key during macro recording, recording of
keystrokes is stopped.
programmer only records the final setting of each setup parameter for those sub-
menus, which are accessed by the programmer. Each time the MENU key is pressed it
is counted as one keystroke in the MACRO.
Upon Playback of the macro, the unit will retrieve only those recorded menu setup parameters, and
will set the unit up accordingly.
recording of the macros, will not be recorded or retrieved during Playback of the macro. These new
menu setups can be activated manually or automatically by time and day (see MACRO TIMED
START) or on Alarm (see ALARM SETUP). Typical uses of this unique MACRO feature are;
q
Different Alarm Associated Alarm Display screens or Alarm Actions
q
Different sequence tables
JVC PROFESSIONAL, IMAGING PRODUCTS
Macro Record
Macro Timed Start
Exit
Upon selection, the system will automatically exit the
Activate output relay 1
Reset output relay 1
PAUSE macro, 1 second
PAUSE macro, 5 seconds
Activate output relay 2
Reset output relay 2
end Macro recording
Instead of recording keystrokes while in the menus, the
Parameters in sub-menus, which were not accessed during
The macro functions can be started
55
Advertisement
Table of Contents
