Front Panel Controls; Connections - JVC SW-D8000U Instruction Manual

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
VCR as part of the video display) the operator is assured of very clear and legible status and titles during
Playback.
2.1

FRONT PANEL CONTROLS

The front panel contains all the operator control keys and indicators, while the video inputs, video
outputs, alarm inputs and outputs, and the remote control connections are on the rear panel.
The unit has DC 12V power and is supplied with an external AC power supply
POWER
ALT
MULTI SPOT ALT
ALT
Function
2.2

CONNECTIONS

The following instructions relate to the multiplexer only. Refer to the relevant instructions for the
associated equipment.
All the connectors are on the back-panel of your multiplexer as shown below. These connectors are:
q 16 Loop-through camera inputs with automatic termination
q Monitor outputs for Monitor-A (BNC and S-VHS) and Monitor-B (BNC)
q VCR input and output (BNC or S-VHS)
q 16 alarm inputs (25 pin D-sub) each of which can be normally open (NO) or normally closed
(NC)
q RS232 and RS485 connections
The 25 pin "D-sub" connector also has the contacts for the two alarm output relays and VEXT input.
The VEXT input accepts a synchronizing pulse from your VCR (see VCR instructions). This allows
the multiplexer to follow, automatically, the time lapse speeds of the VCR if they change due to
manual changes or alarm activity.
JVC PROFESSIONAL, IMAGING PRODUCTS
FRONT PANEL CONTROLS
Live Record Play
LIVE REC PLAY
{ F}
FN ALM SEQ ZOOM FRZ
Alarm Zoom
Sequence Freeze
REAR PANEL CONNECTIONS
1 2 3 4 5 6
9 12 13 14
10 11
Camera Select Key 1-16
Enter
SW-D8000U
MULTIPLEXER
7 8
15 16
MENU
Arrow Key Menu
13