Time/Date Set Up - JVC SW-D8000U Instruction Manual

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
q To exit and save the changes made, select OK and press the ENTER key.
CAUTION:
The Available Menus:
The MENU bar enables you to select MAIN, QUICKINSTALL, OPERATOR or
SYSTEMVIEW. To do this, highlight the one that you want using the left or right arrow
keys and press ENTER.
This manual provides instructions on programming of the MAIN menu items. The QUICKINSTALL
menu items are programmed similar to the MAIN menu and are therefore explained in this manual.
The OPERATOR and SYSTEMVIEW menu's are described and explained in section 3.7.
MENUS
When selected, the menus will be listed on Monitor-A as follows:
Main
Time/Date
Sequencing
Record
Alarms
Macro
Motion Detection
Camera Titles
Camera Setup
VCR Setup
Communications
Front Panel Lock
Factory Settings
Passwords
Exit
4.5

TIME/DATE SET UP

This option lets you specify the time and date settings. You may chose whether to display on
Monitor-A and Monitor-B, the format to be used, and if an external clock is to be used.
To edit the time and date, use the QUICKINSTALL menu or the TIME/DATE submenu from the
MAIN MENU. The following pull down menu appears:
42 JVC PROFESSIONAL, IMAGING PRODUCTS
Pressing MENU to exit from a sub-menu will NOT save the changes made in that
sub-menu. The MENU key is the same key as CANCEL. To save the changes
made in a Pop-Up menu, select OK and then press the ENTER key.
QuickInstall
Change the Time
Change the Date
Edit Camera Titles
Camera Disable
SVHS/Composite
Normal Record Speed
VCR Level Type
Installer Password
Auto Disable Now
Exit
Time/Date Display
Set Time Format
Operator
Sequencing
Time / Date Display
Title Display
Playback Format
Alarm History
Operator Password
Normal Record Speed
Exit
SystemView
SystemView 1
SystemView 2
SystemView 3
SystemView 4
SystemView 5
SystemView 6