Time/Date Set Up - JVC SW-D7000U Instruction Manual

SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
4.5

TIME/DATE SET UP

This option lets you specify the time and date settings. You may chose whether to display on
Monitor-A and Monitor-B, the format to be used, and if an external clock is to be used.
To edit the time and date, use the QUICKINSTALL menu or the TIME/DATE submenu from the
MAIN MENU. The following pull down menu appears:
The time can be in one of two formats, and date can be in one of three formats.
be either a 12-hour or 24 hour clock.
YY/MM/DD.
Changing Time/Date Display Colors:
The color of the on-screen time and date on Monitor-A can be changed to black, gray, or white. To
change time and date color on Monitor-A, select a full-screen view of that camera on Monitor-A , and
toggle its position and color as described in Section 4.8. This time/date color setting is a global
system setting and therefore all time/date displays will be affected.
Summer/ Winter Time Change:
In some installations personnel with access to the menus are not available to reset the
unit's clock during time changes for summer and winter. The SW-D7000U provides a
simple shortcut to set time forward by an hour in spring and back by an hour in the fall, by
using the FUNCTION key.
To adjust the clock by an hour for Summer/Winter time changes press
FUNCTION and then press the SEQUENCE key.
In April, this will cause the time to be adjusted forward by one hour.
In and October, this will cause the time to be adjusted back by one hour.
This function can only be used once in each period. For example, if
FUNCTION + SEQUENCE is pressed during March it will add an hour to the
time, but if FUNCTION + SEQUENCE is pressed again then it will be ignored
until September.
NOTE: When setting the date, select the correct day of the week, 1 to 7. For example, if today's
date is set on a Wednesday and Sunday is day 1 in the week, then enter a '4' during date
setup. This is used to start a SCHEDULED MACRO (Timed Macro) on the correct day.
JVC PROFESSIONAL, IMAGING PRODUCTS
Time/Date Display
Set Time Format
Set Date Format
Set Time
Set Date
Exit
Date format can be either DD/MM/YY, MM/DD/YY, or
Time format can
45