Table of Contents
Advertisement
INTRODUCTION
Purpose
This manual describes procedure and method for installing Smart MBS RRH-C2A.
Document Content and Organization
This manual consists of 2 Chapters, 6 Annex and Abbreviation as follows:
CHAPTER 1. Before Installation
This chapter introduces safety rules that must be understood for installing RRH-C2A and
describes the configuration of RRH-C2A.
CHAPTER 2. Installation of RRH-C2A
This chapter describes the procedure to install RRH-C2A.
ANNEX A. Sector Antenna Installation
This annex describes sector antenna configurations and its installation requirements.
ANNEX B. Feeder Line Work
This annex describes cautions and allowed radius of curvature when installing feeder line.
ANNEX C. Assembling connector
This annex describes the procedure of assembling connector.
ANNEX D. Cleaning Optic Connector
This annex describes the procedure of cleaning the optic connector and cleaning tool.
ANNEX E. Pressure Terminal Assembly
This annex describes the procedure of assembling the pressure terminal.
ANNEX F. Standard Torque
This annex describes the standard torque when assembling the fixing materials.
© SAMSUNG Electronics Co., Ltd.
Smart MBS RRH-P4 Installation Manual
I
Advertisement
Table of Contents
