Figure 1.1 Front View Of The Cnf24; Table 1.1 Ports And Leds Of The Cnf24 - Samsung OfficeServ CNF24 Technical Manual

Front View of CNF24
The front view of the CNF24 card is shown in the figure below:
LAN
The components on the front panel of the CNF24 have the functions below.
Ports, LEDs
LAN
SIO
RST
RUN LED
SVC LED
LAN LED
MC LED
© SAMSUNG Telecommunications America, LLC
SIO

Figure 1.1 Front View of the CNF24

Table 1.1 Ports and LEDs of the CNF24

Port that connects the Ethernet.
- Connector: RJ45
- Cable: CAT 5 cable, UTP
UART port (for tests).
Button for resetting the CNF24.
This LED indicates CNF24 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates if the CNF24 service is being offered.
This LED turns on when the CNF24 software task can be serviced.
- Red blink: CNF24 service is not available
- Green blink: CNF24 service available
This LED indicates the status of the Ethernet link
- Red: Linked as 10 BASE-T Ethernet mode
- Red blink: Transmitting/receiving data as 10 BASE-T
- Green: Linked as 100 BASE-TX Ethernet mode
- Green blink: Transmitting/receiving data as 100 BASE-T
- Orange: Linked as 1000 BASE-TX Ethernet mode
- Orange blink: Transmitting/receiving data as 1000 BASE-TX
- Off: Link off
- Green blink: Auxiliary memory (NAND) is accessed.
- Off: No access
01/2011
CNF24 Technical Manual
RUN SVC LAN MC
CONF REC MEM BACKUP
RST
CNF24
Functions
2