Figure 4.11 Mjoin Feature Code - Samsung OfficeServ CNF24 Technical Manual

Join Meet-Me Conference
1.
Dial Meet-Me Feature Key or Code
Settings for internal and external users are different as below.
Internal Users

There are two ways to start a Meet-Me conference.
 Assign [MJOIN] key to station users in DM 4.9.2.
Select [MJOIN] key.
 Assign [MJOIN] feature code number in DM 2.8.0.
Dial [MJOIN] feature code.
External Users

 Set DID routing table in DM 3.2.3 to allow external users to join Meet-Me
conference.
(1) Assign [MJOIN] feature code number in DM 2.8.0. (ex. 88)
(2) Enter specific digits as Incoming digits in DM 3.2.3. (ex. 200)
(3)
2.
Dial Conference ID
Attendee hears announcement requesting Conference ID.
Attendee dials Conference ID as specified in the examples below.
Conference ID (xxx) + End of Digit ('#')

 4 digits
 Attendee joins the conference as Anonymous.
Conference ID (xxx) + Member Login Index (yy) + End of Digit ('#')

 6 digits
 Member Login Index can be 00 to 99. If attendee dials 99 as member login
index, that attendee joins the conference as a Host. If host does not enter
member ID 99, he/she will not receive auditable tone indicating 3 minutes
remains before conference ends warning message.
© SAMSUNG Telecommunications America, LLC
Enter MJOIN feature code as its Ring Plan in DM 3.2.3.

Figure 4.11 MJOIN Feature Code

01/2011
CNF24 Technical Manual
40