Table of Contents
Advertisement
Additional Features
Additional features of Meet-Me Conference can be checked on [My Scheduler]
[Watch]. When conference status is "In-Progress" the [Watch] feature is enabled.
1.
Logon to the Conference Manager and click on [My Scheduler] menu.
2.
All conferences information is displayed.
Select conference to record and click on [Watch] button.
Lock/Unlock the Conference
If [Lock] is checked, no more attendees can join the conference. Remove the check
mark on [Lock] to allow attendees to join.
Mute/UnMute a Conference Member
If [Mute] is checked, attendee can't be heard by other participants.
Remove a Conference Member
If the host clicks on [Remove] button, that attendee is removed from the conference call
and can't join the conference in progress until the host clicks on [Clear] button. If an
external user is removed from the conference call and has a specific CLI number, a
member who has the same CLI number can't join the current conference until hosts clicks
on [Clear].
Conference Time Extension
There are two ways to extend a conference end time.
1) PWP: Click on [Active Conference Status] menu and select conference you want to
extend. Click on [Extend Time] button. Each click on the [Extend Time] button will
extend the conference duration by 15 minutes. Hosts can extend end time up to 1
hour.
Transfer Into Meet-Me Conference
This feature allows a conference attendee to transfer another member into the Meet-Me
Conference.
There are two ways of transferring a current call onto a Meet-Me conference.
1) During a Conversation
When user <A> and user <B> are on a conversation, <A> can transfer <B> into the
Meet-me conference.
(a) During a conversation, <A> selects [TRSF]+[MJOIN].
(b) User A enters the conference ID and password while the opposite party <B> is on
hold.
(c) User <A> then is disconnected and User <B> joins the Meet-Me conference.
© SAMSUNG Telecommunications America, LLC
01/2011
CNF24 Technical Manual
45
Advertisement
Table of Contents
