Table of Contents
Advertisement
Meet-Me Conference Options
In Device Manager 9.1.1 users can set Meet-Me Conference options such as basic join flow
and mail server environment.
Basic Meet-Me join flow can be changed in DM 9.1.1 Conference Options or MMC 870:
Conference [CNF24] Options. If specific option is disabled, related flow will be skipped.
Below options affect the conference join flow.
Password Options
Greeting Options
Whoami Options
SPA Options
Join/Leave/End Alarm Options
Only conference host can hear the End Alarm at intervals of 30 seconds, starting 3
minutes before the conference ends.
The other options' definitions are below.
Early Ent Time: Set early entrance time.
Member can join the conference 15 minutes earlier than the reserved time.
Mail Server Options: If this option is enabled, mail server will follow related options (Mail
Max Retry, Mail Day Saving Time, Mail Time Zone Offset etc.)
Mail Max Retry: Mail sending maximum retry count when sending fail.
Mail Retry Interval: Mail sending retry interval when sending fail.
Mail Day Saving Time: Option to be used when switch time zone is different than
scheduler time zone. Settings are Enable or Disable.
Mail Time Zone Offset: Mail Time Zone One Offset. Adjust in 15 minutes intervals
difference in switch time and end user time zone.
Max Record Time: This is the maximum allowed time a user can record a current Meet-
Me Conference. (Default: 300 minutes).
Mail Server IP: E-Mail Server's IP address. This address may be needed in the Mail
Server Domain also.
Mail Server Port: Mail Server's connection port number
Mail Server User ID: E-Mail Server account setup to associate Conference card e-mails.
Mail Server Password: Password for Mail Server User ID, make sure it is set not to expire,
or e-mails will not authenticate and no e-mail will be delivered.
Mail Server Domain: Mail Server's Domain Address (may require Mail Server ID Address)
put in this field to talk to certain E-Mail Servers.
DNS IP: DNS IP address (used for Mail Server Domain)
Record Alarm Capacity: Alarm will be generated when the capacity of recording files
becomes the designated capacity. (Default: 70%)
Record Delete Capacity: Recording files will be deleted when the allowed recording
reaches the designated capacity. (Default: 90%)
In this case the oldest file is deleted automatically.
© SAMSUNG Telecommunications America, LLC
01/2011
CNF24 Technical Manual
31
Advertisement
Table of Contents
