Table of Contents
Advertisement
Important
• Paper in paper form [Label/Gap] must meet the following requirements:
– The total of the paper width, left gap, and right gap is 25.0 mm (0.98 inch) or more.
– The total of the left margin and left gap or the total of the right margin and right gap is 2.5 mm (0.1
0 inch) or more. (When printing in AIS mode, it is 2.7 mm (0.11 inch).)
• The AIS mode is a function to reduce consumption of the print head.
When activated, left and right minimum margin is 2.7 mm (0.11 inch).
the total of the left margin and left gap or the total of the right margin and right gap is 2.7 mm (0.11
inch).)
• Do not print outside the printable area of the selected paper.
• Printed image may be blurred when the image is placed within 7.5mm from paper leading edge.
Note
• "Tag paper" is non-adhesive paper.
• "Gap" is the space between separator (label-mount) and label (upper paper).
Feeding
Direction
Margin
Printing area
Gap
Using Page Setup Features
P.105
（→
）
In tne case of [Label/Gap],
（
59
Advertisement
Table of Contents
Troubleshooting
