Canon Laser Shot LBP-2410 Getting Started Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. LASER SHOT LBP-2410
  6. Getting started manual
Canon Laser Shot LBP-2410 Getting Started Manual

Canon Laser Shot LBP-2410 Getting Started Manual

Hide thumbs Also See for Laser Shot LBP-2410:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
Read this manual carefully before using your printer.
Save this manual for future reference.
This manual describes the instructions to get
your printer ready for use.
Contents
Step1 Taking the Printer out of the Package and
Installing the Printer ........................................ 6
Confirming the Package Contents.............................. 6
Printer ON ......................................................... 8
Step3 Installing a Drum Cartridge and Toner
Cartridges....................................................... 10
Step4 Loading Paper ................................................ 17
Selecting an Output Tray .......................................... 20
Step5 Installing the Software and Connecting the
Printer to a Computer .................................... 22
After Completing Installation .................................... 25
Printing a Test Page.................................................. 26
When Installation Fails ............................................. 27
Installing the 250-sheet Paper Feeder ..................... 31
Appendix...................................................................... 44
Contents of CD-ROM .................................................. 44
Manuals for the Printer
Getting Started Guide (This Manual)
User's Guide
CD-ROM
Instructions for printing, regular maintenance, and troubleshooting
Guides with this symbol are PDF manuals included on the
CD-ROM
accompanying CD-ROM.
(Before using the CD-ROM, see "Contents of CD-ROM," on p.44.)
CD-ROM

Advertisement

Table of Contents
loading

Related Manuals for Canon Laser Shot LBP-2410

Summary of Contents for Canon Laser Shot LBP-2410

  • Page 1: Table Of Contents

    Contents Step1 Taking the Printer out of the Package and LASER SHOT LBP-2410 Installing the Printer ........6 Confirming the Package Contents......6 Getting Started Guide Carrying the Printer to the Installation Site....6 Step2 Connecting the Power Cord and Turning the Printer ON ............

  • Page 2: Laser Shot Lbp-2410

    Indicates a warning concerning operations that may lead to death or Trademarks personal injuries if not performed correctly. In order to use the printer safely, always pay attention to these warnings. Canon, the Canon logo, LASER SHOT, LBP, and NetSpot are trademarks of Canon Inc. CAUTION ®...
  • Page 3 Optional Equipment Installation Site The following options are available to use the printer to its full extent Installation Environment accurately. For the optional items, consult the store where you purchased the printer. In order to operate the printer smoothly and safely, install the printer where "Temperature/Humidity Conditions", "Power Conditions", and "Installing I 250-sheet Paper Feeder Conditions"...
  • Page 4 - A poorly ventilated room NOTE - Near devices that generate magnetic or electromagnetic waves To customers using an ultrasonic humidifier - In rooms such as laboratories where chemical reactions occur Impurities contained in tap water or well water are emitted from an - In a room where corrosive or poisonous chemicals such as salt or ultrasonic humidifier.
  • Page 5 Installation Space System Requirements Secure space around the printer as shown below, and install the printer on a Operating system software environment platform that can tolerate the weight sufficiently. The dimensions of each • Microsoft Windows 98/Me • Microsoft Windows 2000/XP section, required peripheral space, foot position, and installed height are shown in the figure.

  • Page 6: Installing The Printer

    For the installation procedure, See "Installing the 250-sheet Paper Feeder," on p. 31. CD-ROM [User Software for LBP-2410] CAPT (Canon Advanced Printing Technology) software Take the printer out of the package. USB Class Driver...
  • Page 7 • The back portion of the printer is relatively heavy. Be careful not to Carry the printer to the installation site. get off-balanced when lifting the printer. The printer may drop and Hold the grips located on both sides of the printer securely with both hands. result in personal injuries.

  • Page 8: Step2 Connecting The Power Cord And Turning The Printer On

    Connect the supplied power cord into the power socket. Connecting the Power Cord and Turning the Step2 Printer ON IMPORTANT • One AC outlet should be used exclusively for the printer. • Do not connect the power cord to the auxiliary outlet on the computer. •...
  • Page 9 Press the power switch on the printer to turn it ON. The Toner lamp (red) will go on after a short period of time. Illuminate...

  • Page 10: Cartridges

    Take the drum cartridge out of the protective bag. Installing a Drum Open the protective bag with scissors, so as not to damage the cartridge. Cartridge and Toner Step3 Cartridges For details on handling the cartridges, See Chapter 5 "Routine Maintenance"...
  • Page 11 • Do not expose the drum cartridge to direct sunlight or strong light. Remove the packing materials by turning them in the direction of the arrows until they stop and pulling them away. Remove the packing materials (7 pieces). Remove the packing materials by hooking your fingers into the tab and pulling them in the direction of the arrows.
  • Page 12 • Hold the packing material and remove it as shown in the figure. Dispose of the packing materials according to local regulations. Hold the drum cartridge with both hands and install it in the printer. Position the triangular mark on the drum cartridge with the triangular mark on the printer and install the drum cartridge IMPORTANT •...
  • Page 13 • Be careful not to hold or touch the prohibited portions such as the sensor IMPORTANT or electrical contacts. It may result in damage to the printer. Lock the drum cartridge securely so that it may be in the state shown in the figure.
  • Page 14 Remove the protective cover. Place the toner cartridge on a flat surface, then pull out the sealing tape (Approx. 45 cm in length) slowly while Hold the protective cover and remove it as shown in the figure. supporting the toner cartridge. Hold the tab on the sealing tape and pull it out straight.
  • Page 15 • Pull out the sealing tape completely from the toner cartridge. If any tape Close the upper cover. remains in the toner cartridge, it may result in a deterioration in print Hold the grip on the upper cover and close it gently. quality.
  • Page 16 Repeat Steps 5 to 11 to install all the color toner cartridges. Close the upper cover, and press (Toner Replacement) for 2 seconds. Toner Replacement Key The Toner lamp will go off after a short period of time, and the Ready lamp (blue) will go on.

  • Page 17: Step4 Loading Paper

    Open the multi-purpose tray. Loading Paper Hold the grip at the center of the front surface of the printer. Step4 This printer feeds paper only from the multi-purpose tray by factory default. When the optional 250-sheet paper feeder is installed, paper can be fed from two paper sources.
  • Page 18 Open the extension tray to load long-size paper such as A4. Spread the paper guides a little wider than the actual paper width. NOTE When closing the tray, remove the loaded paper, then close the tray by Gently load the stack of paper with the print side facing up reversing the opening procedure.
  • Page 19 • Confirm that there is sufficient space between the paper limit guides and Slide the paper guides so that they fit to both sides of the the paper stack. Take out some paper when there is no space. paper stack. •...

  • Page 20: Selecting An Output Tray

    IMPORTANT Selecting an Output Tray Remove paper from the sub output tray one by one each time it is fed. This printer has two output trays: "output tray" and "sub output tray". Switching to the Sub Output Tray I Output Tray Open the sub output tray to switch to it.
  • Page 21 Switching to the Output Tray Close the sub output tray to switch to the output tray.

  • Page 22: Printer To A Computer

    Make sure that the USB cable is not connected to the Installing the Software computer or printer. and Connecting the IMPORTANT Step5 • Connect the printer and the computer with the USB cable at the Printer to a Computer appropriate point during the installation (Step 8 © p. 24). •...
  • Page 23 Click [Next]. Check [Install Printer Driver through a USB Connection], then click [Next]. Confirm the contents and select [I accept the terms in the license agreement], then click [Next]. The message [Unable to cancel setup after setup is started. Are you sure you want to start setup now?] will be displayed.
  • Page 24 If the printer is turned OFF, press the power switch to turn the printer ON. After the display shown below appears, connect the printer to the computer with the USB cable. Select [Yes, I want to restart my computer now], and then click [Exit].

  • Page 25: After Completing Installation

    For Windows XP: • After Completing Installation The printer icon for [Canon LASER SHOT LBP-2410] will be displayed in the [Printers and Faxes] folder. • [Canon Printer Uninstaller] will be added in [All Programs] under the [Start] When installation of the CAPT software is complete, an icon and folder for menu.

  • Page 26: Printing A Test Page

    Select the [Canon LASER SHOT LBP-2410] icon, then select Printing a Test Page [Properties] from the [File] menu. Before using the printer for the first time, be sure to print a test page using the following procedure. NOTE The screens used are for Windows 98.

  • Page 27: When Installation Fails

    IMPORTANT Uninstalling the USB Class Driver If you are using Windows 98/Me, the option of [Separator page] is disabled for printing. Confirm that the computer is connected to the printer with the USB cable, and the printer is turned ON. When printed properly, click [Yes].
  • Page 28 [Device Manager] tab, and then double-click [Universal Serial Bus controllers]. Serial Bus controllers]. Select [Canon LASER SHOT LBP-2410] for Windows 98, or [Canon CAPT USB Device] for Windows Me, then click [Remove]. For Windows 2000/XP, click [Hardware] © [Device Manager], then double-click For Windows 2000/XP, display [Canon LASER SHOT LBP-2410] or [Canon CAPT [Universal Serial Bus controllers].
  • Page 29 Click [Start] menu © [Program] © [Canon Printer Uninstaller] © [Canon LASER SHOT LBP-2410 Uninstaller]. For Windows XP: Click [Start] menu © [All Programs] © [Canon Printer Uninstaller] © [Canon LASER SHOT LBP-2410 Uninstaller]. The [Delete Printer] dialog box will appear.
  • Page 30 Click [Exit]. The [Delete Printer] dialog box will close.

  • Page 31: Step6 Installing The Optional Equipment

    Confirming the Package Contents Installing the Optional Confirm that the following items are contained in the package before installing the 250-sheet paper feeder. If an item is missing or damaged, Equipment please contact the store where the printer was purchased. Step6 Installing the 250-sheet Paper Feeder Installation Space...
  • Page 32 IMPORTANT Remove all the interface cables and the power cord from • Do not touch the connector or roller in the paper feeder. It may result in a the printer. malfunction or misfeeds. Connector Move the printer from the installation site. Hold the grips located on both sides of the printer securely with both hands.
  • Page 33 • The back portion of the printer is relatively heavy. Be careful not to Pull out the paper cassette from the paper feeder. get off-balanced when lifting the printer. The printer may drop and result in personal injuries. Heavier on the back portion Remove the tape that is securing the paper guide at the back.
  • Page 34 Push down the paper cassette plate a a a a , remove the packing Set the printer slowly on the paper feeder. material by turning it to the leftward b b b b . Set the printer by adjusting the grips to the pockets on the paper feeder. Grips for moving Set the paper cassette into the paper feeder.
  • Page 35 • Do not touch the black rubber pad in the paper cassette. It may result in Loading Paper in the Paper Cassette misfeeds. Up to approximately 250 sheets of plain paper (64 g/m ) in sizes of A4, B5, Rubber pad A5, Legal, Letter, and Executive can be loaded in the paper cassette in the optional 250-sheet paper feeder (Cassette1).
  • Page 36 CAUTION IMPORTANT Do not touch the lock release levers located on the right-and-left Slide the paper guide to the "B5-JIS" position when using B5 size paper sides of the paper cassette when the plate of paper cassette is (182 mm x 257 mm). "B5-ISO" and "8.5" x 13"" are not used. locked.
  • Page 37 NOTE Load the paper stack so that the bottom of the page touches the paper guides. To print on letterhead paper or paper printed with a logo, load the paper so that the print side is facing down and the top of the paper to the front of the cassette.
  • Page 38 Set the paper cassette into the printer. Registering the Paper Size for the Paper Cassette Push the paper cassette into the printer firmly until the front side of the cassette is This printer's paper cassette cannot automatically detect the paper size. flush with the front surface of the printer.
  • Page 39 The Printer Status Window will appear. Select the [Canon LASER SHOT LBP-2410] icon, then select [Properties] (for Windows 98/Me) or [Printing Preferences] Select [Register Paper Size] from the [Options] menu in the (for Windows 2000/XP) from the [File] menu. Printer Status Window.

  • Page 40: Installing The Network Board (Axis 1611)

    Confirming the Package Contents Installing the Network Board (AXIS 1611) Confirm that the following items are contained in the package before By installing the optional network board (AXIS 1611), you can use the LBP- installing the network board. If an item is missing or damaged, please contact the store where the printer was purchased.
  • Page 41 IMPORTANT Installing the Network Board • The network board on this printer cannot be connected to a network other Install the network board in the expansion board slot located on the back side than the networks described above. of the printer in the following procedure. •...
  • Page 42 Press the power switch to turn OFF the printer a a a a and Insert the network board into the expansion board slot. unplug the power cord from the AC outlet b b b b . Hold the metal panel portion of the network board and install the board by adjusting it to the guide rail inside the extension board slot.
  • Page 43 Connect the LAN cable to the LAN connector of the network Connect all the interface cables and power cord. board. Connect a LAN cable that is compatible to the LAN connector on the network Connect the power plug into the AC outlet. board according to the network.

  • Page 44: Appendix

    Contents of CD-ROM You can install the software from the CD-ROM Menu. I CAPT (Canon Advanced Printing Technology) software, USB class driver This printer requires the CAPT (Canon Advanced Printing Technology) software that is contained in the accompanying CD-ROM to perform printing.

Table of Contents