Canon LX-D5500 User Manual page 180

Chapter 6 Troubleshooting
Condition
Overall appearance of the print
is poor.
Printed paper is wavy and
rubbing marks are left on the
paper.
The color printed differs from
the color on screen.
The back side of the paper is
stained.
The images on the edge of the
paper are missing.
176
Solution
Use dedicated paper.
Do not use paper other than dedicated paper. It can cause paper
jams and malfunctions.
Confirm that the paper set (size, shape, and type) matches the
paper (size, shape, and type) configured by the application
software or printer driver.
Set the resolution to [Input resolution 1200dpi] (prioritize image
quality) and then print.
（→
Confirm that the paper set (size, shape, and type) matches the
paper (size, shape, and type) configured by the application
software or printer driver.
Open the [Utility] tab in the printer driver and then select the
[Prevent Paper Rubbing Mode] in the [Special Settings].
Open [Color] tab of the printer driver, and adjust the settings for
image quality and color.
Confirm that the [Display] and [Screen Properties] are correctly
configured in the control panel of the computer used. Especially
if the type of display or gamma factor is wrongly configured, the
proper color will not be displayed.
Clean the transport area.
Paper whose width is longer than its height is being printed with
any of the following application software.
- Microsoft Office PowerPoint
- Microsoft Office Word 2010
- Microsoft Office Word 2013
When you print to a paper whose width is longer than its height,
some application software may automatically change the paper
orientation, hindering proper printing.
Open the [Page Setup] tab in the printer driver and set [Orientation]
and [Print with the selected orientation] according to the
document orientation.
（→
P.69
）
P.67
（→ ）
P.163
（→ ）
P.63
）
P.105
（→ ）