Table of Contents
Advertisement
5
When the following message appears, remove ink tanks.
6
Close the ink tank cover and ink tank door.
Do not operate the printer before the message indicating that [Shipping The Printer] is
completed appears.
7
Check that execution of [Shipping The Printer] is completed, and then click [OK].
8
Turn the power off after you confi rm that the printer has stopped.
9
Disconnect the power cord and interface cable.
Important
• When the power lamp is lit or blinking, do not remove the power plug from the outlet. A
printer failure could result.
• Setup cleaning runs automatically when you turn on the power next time.
Shipping the Printer
211
Advertisement
Table of Contents
Troubleshooting
