The scope of delivery for most of the DHW tanks includes the following:
● Electric tank heater (except for PAW-TA15C1E5STD and PAW-TA20C1E5C)
● Safety valve, supplied loose (for stainless steel hot water tanks only)
● Immersion temperature sensor with sleeve and 2 m cable
● Sacrificial magnesium anode (for enamelled hot water tanks only)
● Thermostatic overload protection
● Adjustable feet
● Insulation in polyurethane foam (Panasonic U-Vacua™ insulation with minimised
thermal conductivity in case of stainless steel hot water tanks)
● 3-way switchover valve set PAW-3WYVLV-SI or CZ-NV1 available as optional
accessory.
i
Note
When installing a domestic hot water tank, observe the respective installation instructions enclosed
with each model. The installation instructions may contain important information about specific
water quality requirements and about additional accessories, which are needed for the installation
of the tank in the heating system and which must be provided by the client.
4.8.1.1 Stainless steel domestic hot water tanks
PAW-TD20C1E5 / PAW-TD30C1E5 / PAW-TD30C1E5-HI
PAW‑TD20C1E5
Components
A
1
2
3
4
5
6
7
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
PAW‑TD30C1E5
PAW‑TD30C1E5‑HI
B
C
8
9
These compact hot water tanks are made of
stainless steel, which guarantees a long life
cycle. They are available in two different sizes
with 200 and 300 litre capacities. All three
models with energy efficiency class A need no
sacrificial anode and are maintenance-free.
A External view
B Internal view (seen from front side)
1 Lid
2 Heat insulation
3 Hot water tank
4 Heat exchanger coil
5 Connection box cover
6 Electric tank heater
7 Adjustable foot (x 4)
C Internal view (seen from top side)
8 Temperature sensor (PAW-TD20C1E5,
PAW-TD30C1E5-HI)
9 Temperature sensor (PAW-TD30C1E5)
Note: Schematic figure of TD30C1E5 shown as an example for all models.
Product Description
73
4