Series - Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual

Product Description
ATTENTION
Danger of water pipes freezing in outside temperatures below 0 °C
Once the heating circuit of a mono-bloc system is filled with water and the outside temperature falls
below 0 °C, there is a risk that the water pipes may freeze up. This can cause a lot of damage to
the device.
The client should therefore ensure the absence of frost by taking one of the following measures:
► Operate the heating circuit using a food-safe antifreeze mixture (propylene glycol).
► Provide an additional cabinet heating in the mono-bloc unit, to prevent the heating circuit
► Drain the water from the heating circuit with field-supplied equipment (manually or

4.5.2 Series

The Aquarea heat pump system has three different series that are in turn available in multiple
model variants. An overview of the complete range can be found at the beginning of this manual
(→
With the large number of different model variants, which illustrates the large variety of
4
characteristics and functions of the Aquarea heat pumps, Panasonic can achieve a high level of
flexibility and adaptability for the most varied applications. This is intended to offer the best possible
solution to address individual heat supply and air-conditioning requirements for buildings using
Aquarea heat pumps.
The following table shows the Aquarea heat pump series and their key characteristics in the context
of typical applications.
Overview of Aquarea series and model variants
Radiators - Fan coil - Underfloor heating - DHW Radiators - Fan coil - Underfloor heating - DHW
24
from freezing up.
automatically) before freezing starts.
1 Model range, p. 8).
Aquarea High Performance
Heating - Cooling - DHW
Single phase from 3 to 16 kW
Three phase from 9 to 16 kW
Normal installation
A+++
A++
Heating 35 °C / 55 °C
1
-20 °C
Minimum outdoor temperature to provide constant capacity at 35 °C supply water temperature
-7 °C (not for all units)
Supply temperature for heating. Maximum / Heat pump only
75 °C / 55 °C (or 60 °C for Aquarea
3 4
J Generation)
Aquarea T‑CAP
Heating - Cooling - DHW
Single phase from 9 to 12 kW
Three phase from 9 to 16 kW
Connectable to
Application
For extreme cold ambient
Energy efficiency
A++ A++
Heating 35 °C / 55 °C
Minimum outdoor temperature
-28 °C (All in One and Bi-bloc)
-20 °C (Mono-bloc)
-20 °C
2
75 °C / 60 °C (65 °C for Aquarea
3 4 5
J Generation)
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Aquarea HT
Heating - DHW
Single phase from 9 to 12 kW
Three phase from 9 to 12 kW
Traditional high-temperature radiators - DHW
Retrofit for old radiators
A++
Heating 35 °C / 55 °C
1
-20 °C
2
-15 °C
75 °C
A++
1
/ 65 °C
3