Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual page 208

Appendix
8
208
Menu
Buffer tank connection
5.6
To connect tank to the system
and if selected YES, to set
T temperature�
• The optional PCB connectivity
must be selected YES to
enable the function�
• If the optional PCB
connectivity is not selected,
the function will not appear on
the display�
Base pan heater
5.7
To select whether or not
optional base pan heater is
connected�
* Type A - The base pan heater
activates only during
deice operation�
* Type B - The base pan heater
activates when outdoor
ambient temperature is
5 °C or lower�
Alternative outdoor sensor
5.8
To select an alternative outdoor
sensor�
Bivalent connection
5.9
To select to enable or disable
bivalent connection�
Yes
To select either auto control
pattern or SG ready input
control pattern�
* This selection only display
to select when optional pcb
connection set to Yes�
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Default Setting Setting Options / Display
No
Yes
Set T for Buffer
5 °C
Tank
No
Yes
Set base pan heater
A
type*�
No
No
Auto
EN
25