Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual page 203

Quick Menu
After the initial settings have been completed, you can select a quick menu from the following options and edit the setting�
1 Press
Force DHW
Weekly Timer
2 Use
3 Press
Menus
Select menus and determine settings according to the system
available in the household� All initial settings must be done by an
authorised dealer or a specialist� It is recommended that all alterations
of the initial settings are also done by an authorised dealer or a
specialist�
• After initial installation, you may manually adjust the settings�
• The initial setting remains active until the user changes it�
• The Remote Controller can be used for multiple installations�
• Ensure the operation indicator is OFF before setting�
• The system may not work properly if set wrongly�
Please consult an authorised dealer�
To display <Main Menu>:
To select menu:
To confirm the selected content:
Menu
1 Function setup
1.1 Weekly timer
Once the weekly timer is set up,
User can edit from Quick Menu�
To set up to 6 patterns of
operation on a daily basis�
• Disabled if Heat-Cool SW is
select "Yes" or if Force Heater
is on�
20
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
to display the quick menu.
Powerful
Force Defrost
to select menu.
to turn on/off the select menu.
For user
Default Setting
Timer setup
Select day of the week and
set the patterns needed
(Time / Operation ON/OFF / Mode)
Timer copy
Select day of the week
Quiet Force Heater
Error Reset R/C Lock
Setting Options / Display
Appendix
8
203