Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual page 212

Appendix
8
212
Menu
Heat-Cool SW
5.17
Force heater
5.18
To turn on Force heater either
manually (by default) or
automatically�
Force defrost
5.19
If auto selection is set, outdoor
unit will start defrost operation
if long heating hour operate
during low outdoor temperature�
Defrost signal
5.20
To turn on defrost signal to stop
fan coil during defrost operation�
(If defrost signal set to yes,
bivalent function will not
available to use)
Pump flowrate
5.21
To set variable flow pump
control or fix pump duty control.
6 Installer setup Operation setup
To access to the four major
functions or modes�
6.1
Heat
To set various water & ambient
temperatures for heating�
* The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�
1
* Only displayed when COOL mode is unlocked (This means when COOL mode is available)�
2
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Default Setting Setting Options / Display
No
Manual
Manual
No
T
4 main modes
Heat / * * Cool / * * Auto / Tank
1, 2 1, 2
Water temp� for heating ON /
Outdoor temp� for heating OFF /
T for heating ON /
Heater ON/OFF
Water temp. for heating ON
Heating ON
temperatures in
Compensation curve
compensation curve
or direct input�
EN
29