General - Panasonic Aquarea WH-ADC0309J3E5 Planning And Installation Manual

General

2 General
About this manual
This Manual describes the planning, design, installation and commissioning of Panasonic Aquarea
air-to-water heat pumps. The key information is to be found in the following three main chapters.
Chapter 4 - Product Description - contains information covering the following aspects:
2
Chapter 5 - Planning - contains information covering the following aspects:
Chapter 6 - Installation - contains information covering the following aspects:
You will also find in Chapter 7 - Maintenance - a description of the key maintenance tasks and
in the Appendix an overview of the error codes and operating instructions for the models of the
J Generation.
In addition to the information contained in this Manual, attention must also be paid to the
information in the installation and operating instructions for the respective device.
Products covered
The current Aquarea heat pump systems are covered in this Manual: mono-bloc systems, bi-bloc
systems and All in One (AiO) systems, which are a combination of a hydrokit and a hot water tank.
A detailed overview of the models covered can be found at →
Intended use
Aquarea air-to-water heat pumps from Panasonic are intended for use in space heating and
domestic hot water (DHW) production and represent complete, high-quality heating systems. If
required, they can be combined with hot water tanks, solar thermal or photovoltaic systems and/or
further heat sources powered by electricity, oil or gas.
The intended use of the heat pumps requires adherence to the information and instructions
contained in this Manual, especially the safety-related information.
Any other use is considered improper and can lead to significant damage.
Panasonic assumes no liability for any damage resulting from improper use.
Target groups
This Manual is aimed at specialist planning and installation operations.
Installation and commissioning of the heat pumps may only be carried out by qualified technicians.
Only persons authorised by the manufacturer may make any changes, conversions and repairs.
Any changes or conversions made by customers themselves will basically exclude any liability
being incurred by the manufacturer for any damage resulting from this in exactly the same way as
with improper use.
Operation of the heat pumps can, in contrast, also be undertaken by private persons.
10
● Air-to-water heat pumps method of function
● Model types, functions and technical data relating to the Aquarea heat pump systems
● Accessories
● Selection and design of the heat pump for specific use
● Selection of the installation site
● Planning and preparing for installation
● Installation of the refrigerating, hydraulic and electrical components
● Commissioning
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
1 Model range, p. 8.