Advertisement
3-5. REMOVAL OF CABINET ASSEMBLY (LEFT)
AND VIEWFINDER
1 . Remove the four screws CD and
cabinet assembly (left) ® .
The FPC (Flexible Printed Circuit) @ and the two con
•
nectors @ (for the viewfinder) and @ (for the lithium
battery) should be disconnected at this time also.
2. Remove the three screws
®·
finder block assembly ® from the cabinet assembly (left)
®
,
and then remove the
(j)
, and then remove the view
,
�--------------·-·
/
,
@) Screw 1 .7 x 6
(#1 03)
@ Cabinet
(right)
3. Pull out the eye - piece ® fully, and then push it back
slightly. Turn it toward the left (in the direction of the
arrow), and then remove it.
4. Remove the screw @) , and then remove the cabinets
(right) ® and (left)® of the viewfinder.
5 . Disconnect the two connectors @ and @ to separate the
viewfinder board section .
® Viewfinder block assembly
J
�
@ Connector
- 3-5 -
__________________ "
@Connector
<, \
';>
N
/
,,
/
/
'
'
'
Advertisement
