Advertisement
3-2. REMOVAL OF TOP LID
1 . Lift up the viewfinder CD , and then press the EJECT
button @ to open the cassette holder ® .
2. Insert a flat-tipped screwdriver between the mechanism
assembly @ and the top lid ® , and then while pushing
both the left and right plate springs @ upward, pull the top
lid ® toward you to remove it.
To install the top lid ® , place it on top of the mechanism
•
assembl y @ , and then slide it away from you while
pressing it down until it clicks into place.
If the power supply is interrupted because of a blown
•
fuse, the cassett e holder will not open . In this case, first
remove the cassette lid, and then remove the top lid ® .
® Cassett e holder
@ EJECT button
@ Mechanism assembly
- 3 - 2 -
Connect the AC adaptor/charger
@ Plate springs
Advertisement
