3. Servicing
Electrical components
PCBc
Plastic holder
Plastic holder
PCBd
Plastic holder
82
SMGB0097 rev.0 - 07/2015
Plastic holder
a. Remove the PCB by pressing
the expanded part of the 4 plastic
holders, using long-nose pliers,
as shown in the picture below.
b. Pull the PCB out from the PCB
plate.
a. Remove the PCB by pressing
the expanded part of the 4 plastic
holders, using long-nose pliers,
as shown in the picture below.
b. Pull the PCB out from the PCB
plate.