Figure 2-25 Angle Display Before Adjusting The Pitch Angle Of The Antenna; Figure 2-26 Angle Display After Adjusting The Pitch Angle Of The Antenna - Huawei BTS3802C Installation Manual

Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU

Figure 2-25 Angle display before adjusting the pitch angle of the antenna

Figure 2-26 Angle display after adjusting the pitch angle of the antenna

6) Make the waterproof curve of the antenna jumper, lay and bind the jumpers
along the cross bar of the support using the black cable tie, and cut off the extra
tail of the cable tie.
7) Hang over the dwang of the support installed with the antenna out of the tower
platform, use bolts to fix the connecting panel.
Installing RF Antenna & Feeder System
2-24
Chapter 2