Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU
2.4 Installing Antenna Support on Tower
Note:
The installation of antenna support is usually done by the customer following the requirements designed
by the vendor. If a support meeting the requirements has already been installed on the site, this section
can be skipped.
The requirements and the installation methods of the support differ according to the
different antenna types and installation environment. "2.4 Installing Antenna Support
on Tower" and "2.5 Installing Antenna Support on Roof" only describe the common
installation case. As for other cases, please refer to the engineering documents and
the support instructions.
2.4.1 Structure of Antenna Support
There are several types of antenna support for the installation on tower. The one
illustrated in Figure 2-4 will be introduced in detail as an example.
Installing RF Antenna & Feeder System
2-4
Chapter 2