Installing Omnidirectional Antenna On Tower Platform; Appearance Of Installed Omnidirectional Antenna On Tower Platform - Huawei BTS3802C Installation Manual

Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU
hoisting, the personnel on the tower shall pull up the rope and the personnel on
the ground shall keep pulling the rope to avoid any damage to the antenna due
to possible collision with the building or with the tower.
Caution:
During the hoisting, make sure there is nobody standing below the hoisted object. The personnel
working outside the tower platform shall wear safety belts and harnesses.
The small metal articles such as the fixing piece and the spanner shall be packed in the tool bag and
then be hoisted.
The hoisted articles shall be put in the place where it is not easy to slip, and make some safety
treatments.

2.7 Installing Omnidirectional Antenna on Tower Platform

This section describes the installation method of omnidirectional antenna on tower
platform.
Warn:
To guarantee the project quality and the safety of constructors, the installation shall be carried out on the
sunny days without strong wind. During the installation especially the antenna installation, the installing
personnel shall attach highly importance to the safety and implement the related safety regulations.

2.7.1 Appearance of Installed Omnidirectional Antenna on Tower Platform

The installation of the omnidirectional antenna on the tower platform is shown in
Figure 2-16.
Installing RF Antenna & Feeder System
2-15
Chapter 2