Installation Requirements; Installation Flow; Figure 2-19 Installation Of The Directional Antenna On The Tower Platform - Huawei BTS3802C Installation Manual

Antenna & feeder system
Table of Contents

Advertisement

Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU
(1) Tower

Figure 2-19 Installation of the directional antenna on the tower platform

2.8.2 Installation Requirements

The antenna shall be in the protection coverage of the lightning rod. No
interference from the tower structure shall exist in the forward direction of the
antenna. The length of the antenna protruding from the tower platform shall be
no less than 1 m.
The gain of antenna shall be 15 dBi, the isolation degree 30 dB, and the semi-
power angle 65°. For details on antenna interval, refer to the Appendix A
Interval Requirement for Antenna Installation.
The waterproof curve shall be made for the antenna jumper.

2.8.3 Installation Flow

The installation flow is shown in Figure 2-20.
(2) Antenna support on the top of the tower
2-20
Installing RF Antenna & Feeder System
(3) Directional antenna
Chapter 2
(4) Cable tie

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rru

Table of Contents