Contents; Layout; Figure B-1 Outdoor Feeder Label (Unit: Mm - Huawei BTS3802C Installation Manual

Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU
Table B-1 Contents of feeder label
NodeB antenna &
feeder system feeder
GPS antenna & feeder
system feeder
II. Layout
The layout of an outdoor feeder label is shown in Figure B-1.

Figure B-1 Outdoor feeder label (unit: mm)

III. Usage
An outdoor feeder label should be bound on a feeder with a black cable tie at:
The point 200 mm away from the lower connector under the outdoor antenna.
The point 200~300 mm down the tower platform.
The point 200 mm away from the outside of the feeder encapsulation window.
The bent.
When binding labels to the feeders, make sure that they are neatly laid out. All labels
should face the same direction, and so should the cable ties. When cutting off the
extra part of a cable tie, make sure to leave 3~5 mm of tail on the cable tie.
Content
ANT
Two-digit Numeral
GPS
One-digit numeral
B-2
Engineering Label of Antenna & Feeder System
Meaning
Antenna and feeder
Numbering starts ascending from 00. The twelve
antenna feeder ports of a cabinet are identified
using 00~11.
GPS system
The two GPS antenna feeder ports are identified
with 0 and 1.
Appendix B